[leericho]

had to fit 16mm spacers to the front of my R, i did have black wheel bolts which looked the shizz!! however i now need some that are 16mm longer, anyone help me out???

Cheers Lee

 

[PaulW]

You need 41mm wheel bolts then

 

[leericho]

You need 41mm wheel bolts then

if you say so.......... in black mate!!

 

[PaulW]

Hmmmm, ill look

 

[cuprabob]

You could always use plastic nut covers if you can't find black bolts.

 

[PaulW]

You could always use plastic nut covers if you can't find black bolts.

I think he needs longer wheel bolts for his spacers?

 

[leericho]

I think he needs longer wheel bolts for his spacers?

had black covers but they never fit, black bolts are the holy grail......

Lee

 

[cuprabob]

I think he needs longer wheel bolts for his spacers?

I realise that, but I meant if he can't find longer bolts in black.

 

[PaulW]

I realise that, but I meant if he can't find longer bolts in black.

Didnt mean to patronize

 

[cuprabob]

had black covers but they never fit, black bolts are the holy grail......

Lee

f
Fair enough, but the black will wear off the bolts once the wheels have been on and off a few times.

It will look good when they are new though

 

[cuprabob]

Didnt mean to patronize />

No problem, I didn't take it that way.

 

[leericho]

now now lads, realize theyll go to rat shite once ive had the wheels on and off, just unsure of sizes and where to buy them.... m14...? or bigger? or am i a mile off bob?

 

[73landau]

I replaced my bolts with studs from trackstuds.com They have a range of lengths and nut types.

Sent from my RM-821_apac_australia_new_zealand_304 using Board Express

 

[PaulW]

M14 is 22mm Spanner

 

[leericho]

M14 is 22mm Spanner

exactly!! help me out brother!! hahaaaaaa m14 to me is 14mm......

 

[cuprabob]

M14 is 22mm

Don't want to sound patronising but M14 is 14mm thread.

I guess he's looking for M14 x 41 bolts.

 

[PaulW]

Haha

M8​

13mm

M10
17mm

M12​

19mm

M14​

22mm

M16​

24mm

M18​

27mm

M20​

30mm

M24​

36mm

What are your bolts now? Im guessing 17mm but some are 19

 

[PaulW]

Don't want to sound patronising but M14 is 14mm thread.

I guess he's looking for M14 x 41 bolts.

see here

http://www.cwfasteners.co.uk/spannerandkeysizes.htm

 

[leericho]

Don't want to sound patronising but M14 is 14mm thread.

I guess he's looking for M14 x 41 bolts.

now ya talking!!
ive no idea what the actual thread size is, but thats a guess, just think ill paint them every time i take a wheel off, not that hard really is it??!! had a few beers!! bit stressed out hahaaa

 

[PaulW]

Ive always though the M14 determines head size 'X' being thread length