[FLORIDA747]

Will 18x8 wheels ET30 with 225/40/18 be ok to fit?

 

[PaulW]

I'm sure bbs CH's are et30 and they go on fine. Bitch of a wheel!

And rs4's

 

[FLORIDA747]

They are [background=rgb(233, 233, 233)] Dotz Exile Rims there currently on a mk4 turbo and look nice just dont want any problems.[/background]

 

[PaulW]

They are nice rims!

You can use a 15mm spacer on an aristo no probs which will bring it down to et 23 so they should be ok.

Can you get a trial?

 

[FLORIDA747]

They are nice rims!

You can use a 15mm spacer on an aristo no probs which will bring it down to et 23 so they should be ok.

Can you get a trial?

The guy lives miles from me so will be a courier involved so no trial

 

[PaulW]

Damn. I'm 99% sure they will be ok but don't wanna say deffo because if they don't you wil be mad haha

 

[L_O_Z]

I quite like Dotz Alloys, my first car had Kyalami Dotz on. To this day they're still one of my favourite alloys

 

[FLORIDA747]

Actual wheels on the guys car.

 

[FLORIDA747]

another shot

 

[VR6Rich]

I'm sure bbs CH's are et30 and they go on fine. Bitch of a wheel!

And rs4's

BBS CH are ET30 and 8.5" wide, mine scrub slightly on the front but 8" wide should be fine.

 

[FLORIDA747]

BBS CH are ET30 and 8.5" wide, mine scrub slightly on the front but 8" wide should be fine.

Where did it scrub on the arch?

 

[VR6Rich]

At the top as it pokes a little bit.

 

[FLORIDA747]

Wanted to go 235/40/18 or maybe 235/35/18 to try and protect the rim a bit (wife drives it as well) and maybe fit some spacers front and back.
Would i be ok with 8mm on front and 15mm on rear with these tyres and spacers with ET30 on standard R32 suspension but may fit H&R springs later.

 

[FLORIDA747]

No one?