VW Golf R32 Forum banner
1 - 20 of 30 Posts

·
Senior Member
Joined
·
947 Posts
Discussion Starter · #1 ·
Ok I will kick things off

Milltek cat back resonated exhaust

Remap by Torque Tronics

K&N Induction kit - might be replaced by a carbonio CAI

MKV rear wiper

Parrot handsfree kit

Clifford Blackjaxx

Private plate
 
G

·
Carbonio Cold Air Intake
Milltek ST Exhaust
Milltek High Flow Sport cats
Milltek Manifolds
Haldex HPP Upgrade
Neuspeed 25mm Front ARB
Neuspeed 22mm Rear ARB
Hella RCCR Lights
LCR Splitter
Neuspeed Short Shifter
Bettle Sport Pins
Polo rear wiper
Dension Gateway 400 MMI
Black Grill and badge
German Cut out lower grills
Blue door led
LED side lights
R-Line centre caps
Cruise control
H&R 15mm spacers for rear
H&R 20mm spacers for front
Powerflex Dog bone engine mount
Revo Stage 2 remap in the next week or so

and possibly more that I have forgotten.
 

·
Registered
Joined
·
7,822 Posts
khutula said:
Carbonio Cold Air Intake
Milltek ST Exhaust
Milltek High Flow Sport cats
Milltek Manifolds
Haldex HPP Upgrade
Neuspeed 25mm Front ARB
Neuspeed 22mm Rear ARB
Hella RCCR Lights
LCR Splitter
Neuspeed Short Shifter
Bettle Sport Pins
Polo rear wiper
Dension Gateway 400 MMI
Black Grill and badge
German Cut out lower grills
Blue door led
LED side lights
R-Line centre caps
Cruise control
H&R 15mm spacers for rear
H&R 20mm spacers for front
Powerflex Dog bone engine mount
Revo Stage 2 remap in the next week or so

and possibly more that I have forgotten.
impressive mod list!

Whats the noise like with the full milltek system ?
 
G

·
Wayne said:
impressive mod list!

Whats the noise like with the full milltek system ?
Thank you

Extremely impressive, at high revs its pretty loud - but I love it.

I quite often sit at traffic lights and rev it - just to here it - hardly ever have the stereo on :151:

Goes like stink too.
 

·
Senior Member
Joined
·
171 Posts
khutula said:
I've one of those too, but it was on my previous car too.
yeah mine was too...not realyl a mod but i thought id list it as I have not changed anything at all and would feel left out :(

ooo and I have a slight mod to the rest of you. as my front badge was missing when got car I had to put one on, and on doing so (not intentionally) i put it more to the right...so unless anyone has moved theirs my badge is slightly modded i guess ;)
 

·
Senior Member
Joined
·
619 Posts
tamr32 any pics of the R shoulder pads? What are those?

My list is very short and simple:

Carbonio,
Cupra Lip
Cruise Control
Sat/Nav
Led side lights
Led reg plates bulbs
Polo Rear Wiper
R centre caps
.:R32 Sunglasses (If you can call it a mod,lol)
Bora Vents
Full FIS Original R32 Cluster (300km/h)
Needles illuminate when you switch on iginition
Few more coming up in couple of weeks-W8 light (waiting in the box), cut out bumper vents, new wheels.
 

·
Senior Member
Joined
·
1,432 Posts
Sportec Mono 10 19" Wheels
Michelin Pilot Sport 2 Extra Load 245/35 ZR19 Tyres
Hella Smoked Tail Lights
Yarrowsport Rear Stress Bar
42 Draft Designs Interior White and Blue LED kit
Vdubmax Billet Aluminum Door Pin Sliders
Koni Coilovers
Carbonio CAI
Unresonated Milltek Exhaust System
EIP Tuning Competition Short Shift and STS
Billet Aluminum Oil Cap
Billet Aluminum Washer Fluid Cap
Billet Aluminum R Strut Caps
Billet Aluminum Power Steering Cap

Currently waiting for the following parts to arrive:

VF Engineering Engine Mounts
HPA Motorsport FT360 Turbo Kit
HPA Motorsport Race Grade Connecting Rod Bearings
HPA Motorsport Competition-spec Haldex Performance Part (Agent Orange)
HPA Motorsport Club Sport Roll Bar
HPA Motorsport Carbon Fibre Engine Cover
TST Revision 2 Rear Stressbrace
 

·
Registered
Joined
·
127 Posts
My list so far...

Stage 2 map
Milltek Hi-flow cats
Milltek ST Zorst
HPA ShortShifter
BMC Filter
KWV3's-front 20mm, rear 25mm
KW rear tie arms
Pentagon Light Smoke tints alround
H&R Spacers-front 10mm rear 15mm
R-Line centre caps
Hella RCR rear lights
Avant rear wiper
Standard black grill
German cut out lower grills
LCR Splitter
Cluster Mods
4 uprated speakers
2 Amps
1 Subwoofer
Private Plate-which goes with the .:R

Loads of things to come this year, APS here i come....again:)

Jimmy
 

·
Senior Member
Joined
·
624 Posts
MKIV DBP 3dr

Engine:
Milltek manifolds
Milltek Sports cats
Milltek non res cat back
Superchips Remap
EIP CCAI
Should be close to 290bhp
EIP street front to rear and side to side short shift
Neuspeed Washer bottle cap
Neuspeed Oil Filler Cap
Neuspeed Coolant bottle cap
Neuspeed Steering Fluid cap
Neuspeed Dip Stick cover (if I can persuade it with the Dremel)

Brakes:
ECS drilled and slotted floating front discs
Tyrolsport stiffening kit
Pagid Orange pads
ECS drilled and slotted rear discs
ATE Blue racing fluid

Suspension:
Haldex PP
Neuspeed upper Strut brace
Neuspeed 22mm front ARB
Neuspeed 25mm race rear ARB
Yarrowsport upper rear stressbrace
Neuspeed Strut tops

Cosmetic:
19" BBS CHs
10mm spacers on rear
'R' centre caps
Custom grill
Porsche 997 Turbo Splitter
Open mesh grills
Glass wiper delete
Hella RCCR Rear lights
Phaeton antenna colour coded

Interior:
VW racing (Beetle) door pins
Blue alarm led
Dash needle lights on
Fuel range activated
Custom Bluetooth mounts
Auto window activated
Billet seat latches
 

·
Senior Member
Joined
·
947 Posts
Discussion Starter · #18 ·
Dan what do you think of the EIP CAI? I was thinking of getting one. Much noise from it?
 

·
Premium Member
Joined
·
4,542 Posts
Ok my short mod list :

Cupra splitter
Carbonio
Stripethree grill mod
Warm silver coloured Aristo's
rear aero wiper
w8 interior light
eip dash vents
eip strut cap covers
ultraled sidelights
german style plates

Re-map and exhaust system to follow !!

Hey jimmy, have you any pics of the car with the spacers on ? i'm thinking of going 15-20 rear and 10-15 front, just wondered how you liked them too ?
 

·
Registered
Joined
·
127 Posts
Hi Steve, have a butchers over on TSN as there should be a few pics floating about, if not i will get Danno to post some up as he has a few pics of my .:R. Tho i will say when fitted with the spacers at speed the .:R comes slighty unsteady, tho this has got better since having the KWv3's fitted with the tie arms. Make sure they are hub centric spacers like the H&R ones i run, and its not to wise to start putting more than 15mm on the rear tho i no chaps that have.

Jimmy
 
1 - 20 of 30 Posts
Top