[craigr32290985]

Looking for the torque setting for the rear hub nut if any one has done this before?

 

[cuprabob]

150 ft/lbs plus half turn.

Check from a 2nd source though

 

[32wanabee]

200nm loosen half turn then 50nm + tighten further 1/4 turn iirc

 

[craigr32290985]

Thanks guys

Sent from my GT-I9100P using Tapatalk 2

 

[alexmac]

200nm loosen half turn then 50nm + tighten further 1/4 turn iirc

Are you the guy that makes all the torques?