[Zig]

hi guys

Im in the middle of sorting out my headlights... I bought a unit off ebay and the indicators keep blowing fuses and the self leveling doesn't work. So bought some a loom which contains the indicator wires and a new leveling motor. However it looks like the new loom has come off a car with the older style lights with the separate ballast pack.. I could do with a picture/diagram of where the wires go in the 12 pin plug...

Any help would be good cheers

 

[PaulW]

Laptops on a seeeeeeeeeeeeeerious go slow but as soon as its sorted ill have a look on ETKA

 

[Zig]

leg end

 

[PaulW]

That any use?

 

[Zig]

close but no cigar mate i need a picture or diagram of where the pins go in this plug for lights with the incorporated ballast pack

 

[Zig]

I should add I could do with one for the actual ballast pack plug as well!

 

[PaulW]

This?

 

[PaulW]

Scrap that i seen your reply

 

[SI-R32]

hopefully this link will work, uploaded a pdf of the wiring for you

https://docs.google....dit?usp=sharing

 

[Zig]

Kind of mate.. I was looking more of the 12 pin plug in the headlight unit and how it connects to the ballast unit plug

 

[SI-R32]

so your not after an electrical diagram?, as what i posted shows the 12 pin plug you just need to interpret the drawing,

can you give a more detailed explanation of exactly what you want?

 

[Zig]

so your not after an electrical diagram?, as what i posted shows the 12 pin plug you just need to interpret the drawing,

can you give a more detailed explanation of exactly what you want?

lol I litterally have no idea when it comes to this sort of stuff.. I'll have another look at the diagram and try to work out whats what

 

[SI-R32]

start on the first drawing you can zoom in or download it if you want

L13 is the xenon bulb next to that is

N195 is the starter unit

above L13 is a little square on the cable with T12a/6 on it this means its the 12 pin plug and its terminal 6 of that plug

if your lost on this sort of thing tell me more what you want to know and i'll try to help out

 

[Zig]

Ahh ok I think I get it.. I'm looking at page 5 and 6 as the comPorte diagram for the right hand light?

 

[SI-R32]

yes that correct, right hand side of page 4 is where it begins and yes then onto 5 and 6 all for the right hand light

 

[Zig]

trying to sort this lot out... wish me luck. I've got part looms from 2 headlamps to complicate things one is from the older style xenons with the separate ballast. The 12 pin plug on the left is from the older style unit (I think) as the wires for the leveling motor come from plug. The 20 pin plug next to the ballast pack (from the newer type light) also has wires that go to the leveling motor (the same set of wires) so some need getting rid of and some I think may need soldering together...

 

[SI-R32]

its a pity you don't live near me, I love this kind of stuff, if i can be of any more help please just ask

 

[Zig]

Will do mate

 

[Zig]

Just wondering if there is s particular way of getting the pins out the plugs as they don't want to budge and I broke one

 

[SI-R32]

First there will always be some sort of retaining clip ie a bit of plastic that needs to move slightly out the way, usually purple but no guarantee, then each pin will have its own retaining clip that needs a special tool or made up piece of metal this totally depends on what the pin looks like as there's 100's of different varieties