VW Golf R32 Forum banner
1 - 6 of 6 Posts

·
Member
Joined
·
877 Posts
Discussion Starter · #1 ·
For sale: One of the parts needs to install an Mk4 R32 DSG snorkel to a 1.8T, TDi or R32. This is the large 'frame' that mounts behind the headlight that the DSG snorkel mounts onto.

Part number is: 1J0 805 962 G B41

For those that don't know the DSG version of the Mk4 R32 had a larger air intake snorkel into the airbox, to shift more volume of air and make more power. The standard R32, 2.8, 1.8T and TDi all had the same smaller air intake pipe so (as standard) they flow less air.

The rest of the parts needed to install this are as as follows:
1J0 805 965 EB 41 - the back of the headlamp cover, the black plastic shield air is ducted through this to the snorkle.
1J0 129 609G - snorkel pipe - this is the larger bore pipe that fits into the larger hole on the bracket I'm selling.

Here is a bit of info from VWVortex about this mod: http://forums.vwvortex.com/showthread.php?2772457-DSG-airbox-and-intake-installation.

£13 posted or £10 collected from Nottingham, I might be going to GTI International so could be collected from me there.




This photo shows the original air intake hole size compared to the DSG air intake hole size, so all standard cars are running with quite a restrictive air intake.
 

·
Member
Joined
·
877 Posts
Discussion Starter · #3 ·
Ay up Rich, I did have the complete DSG intake kit to install on my latest project/daily car as im not usually a fan of those big ass cone air filters, but I could only use the snorkle and the rear cover behind the headlight, I couldnt use this frame because of some intercooler pipework that runs very closely under the headlight. Wil have a look on mkivs in a bit, supposed to be working now
 
1 - 6 of 6 Posts
Top