VW Golf R32 Forum banner

R32 Motronic me7.1.1 ecu pinout

10238 Views 3 Replies 3 Participants Last post by  CorradoR32
Does anyone have Motronic me7.1.1 ecu pinout?I'm doing r32 swap for my mk3 ,but half of wires is cut off
See less See more
1 - 2 of 4 Posts
Need someone with ELSAWin. I think Slapbladder has it?

Which harness has been cut? There are 2 on ME7. The first one is the 'Engine harness' which feeds the coils, injectors, VVT, EGR, SAI, Intake etc etc doesn't pass through the bulkhead into the car, so can easily be removed from the dead car. This harness is the right hand plug viewing the ECU from the plug end.

The second harness is the 'car harness' (left ECU plug), which is the one with the DBW pedal loom, lambdas, power relays (ECU, SAI, Coils/injectors etc). Lazy & ignorant breakers always cut that one as it partially goes into the car.
  • Like
Reactions: 1
Top man! I've nabbed that for myself

If you do ever find the time to do R32 harness, I'd be grateful as I'm trying to trace a CAN-BUS fault with the comfort module.
See less See more
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.