VW Golf R32 Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
265 Posts
Discussion Starter · #1 ·
Ok a mate from vw has managed to get me a refurbished rns510 b (customer wanted the kenwood in the end) now the question is I have a 56, does it need coding and I assume I won't need a canbus as this is the version ment for my year am I right?
 

· Flaccid Member
Joined
·
1,788 Posts
The rns wasn't offered till 57 / 08 cars, but yes it can easily be fitted and coded up but here's the major problem you will either need to run modified firmware on the 510 or change your canbus gateway as it will drain your battery, your mate at VW should know this kind of thing!!
 

· Registered
Joined
·
112 Posts
The canbus module is not the easiest thing to change but can be done. Mine was located behind a hatch hidden by the wiper motor. I had to remove the wipers, top part of firewall, plastic top cover, wiper motor assy, and then you can get to the hatch held on by two nuts. If you are going to the effort, install a polar fis+ at the same time.

Sent from my RM-821_apac_australia_new_zealand_304 using Board Express
 

· Registered
Joined
·
265 Posts
Discussion Starter · #4 ·
73landau said:
The canbus module is not the easiest thing to change but can be done. Mine was located behind a hatch hidden by the wiper motor. I had to remove the wipers, top part of firewall, plastic top cover, wiper motor assy, and then you can get to the hatch held on by two nuts. If you are going to the effort, install a polar fis+ at the same time.

Sent from my RM-821_apac_australia_new_zealand_304 using Board Express
What does the polar fis do?
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top