VW Golf R32 Forum banner
1 - 20 of 23 Posts

·
Registered
Joined
·
117 Posts
Discussion Starter · #1 ·
Any one know where i can buy Schrik cams in this country?
 

·
Registered
Joined
·
117 Posts
Discussion Starter · #3 ·
cheers, mines in bits in a garage with a blown head gasket and while its in bits im going for cams and all sorts but the tuners suppliers are saying 12 week delivery on the cams and im not waiting that long, il give them a buzz in the morning
 

·
Cannot reMember
Joined
·
16,142 Posts
Woooo apart from Schrick (and TT in USA), I've not heard of many manufacturers of aftermarket cams for our cars.

Who's that guy then? Anyone used these cams before?
He's 'Napkin' on here he has a V5 turbo in a bolf estate.

Does R32T and R36 FI. Really nice guy. Not sure anyone on here has used his stuff. Hes making 300mm upgrade kits for me though
 

·
Eats Kitty Litter
Joined
·
7,307 Posts
The above link CHEEMPEEJ stole from me. The cams are made by Dblias from ground blanks same as Schricks just a slightly lower profile. I think he is just trying to sell off a few he has in stock as that is a big discount on Dblias cams. If you want Schrick cams a friend of mine owns a company where i got mine from which took about 10 days to get to me.
http://www.bar-tek-tuning.com/lshop,showdetail,10243,en,1365026505-10257,1107452820.nockenwellenvw.r32,21r3202,2,Tshowrub--1107452820.nockenwellenvw.r32,.htm
 

·
Cannot reMember
Joined
·
16,142 Posts
The above link CHEEMPEEJ stole from me. The cams are made by Dblias from ground blanks same as Schricks just a slightly lower profile. I think he is just trying to sell off a few he has in stock as that is a big discount on Dblias cams. If you want Schrick cams a friend of mine owns a company where i got mine from which took about 10 days to get to me.
http://www.bar-tek-t...llenvw.r32,.htm
HA FU
 

·
Member
Joined
·
4,420 Posts
fight, fight, fight, fight, fight!

No No No No
 

·
Registered
Joined
·
4,468 Posts
Does anyone know which profile is needed to increase low to mid power, and without it affecting the smoothness of idle?
 

·
Cannot reMember
Joined
·
16,142 Posts
Email Chris at 'Carlicious' James he will point you in the right direction with pros and cons of different degrees etc
 

·
Senior Member
Joined
·
5,496 Posts
Does anyone know which profile is needed to increase low to mid power, and without it affecting the smoothness of idle?
From what I've read on VWvortex (lots of people on there have upgraded cams), none of the cams effects the smoothness of the idle at all.

even the lumpiest 270/270 duration that Schrick sell don't effect the idle smoothness
 

·
Senior Member
Joined
·
5,496 Posts
Probably worth about 10-15bhp gain when coupled with the correct remap,

you might see around 20bhp by the time you add a decent cat/decat to the mix
 

·
Registered
Joined
·
117 Posts
Discussion Starter · #17 ·
Cheers fellows, it's getting the aggressive shtick cams, high flow headers full system with high flow cats air filter and re map, il rolling road it at an independent and post the results, pod is only half hour up the road as well so il run it up the strip a few times and post details
 

·
Registered
Joined
·
117 Posts
Discussion Starter · #19 ·
they are supposed to be coming from lucifers mates at vagtech as part of a package, final price to be agreed
 
  • Like
Reactions: Joesmif
1 - 20 of 23 Posts
Top