[IIVORC]

Fitted a seat leon front splitter to my mk5 today, really easy to fit, only had to cut two centre pieces and screwed it on to the bumper, such a fairly cheap simple mod makes all the difference, really pleased with it, next week my Neuspeed lowering springs arrive from Awesome Gti so I CAN'T WAIT to fit them, website states a 1.4" drop all round so should look sweeeet, will add more photos when they are on.....

 

[R32_Wez]

Splitter is a nice OEm looking touch to an R32, and get those sprigs fitted buddy

Then of course come post some pics

Nice looking R too !

Wez

 

[Fat Head]

looking good

this reminds me i need to get a new splitter, it had a fight with a speedbump and has battle scars

 

[AwesomeMike]

Looking good!! The LCR splitters do really make a nice difference!!

Mike

 

[AwesomeAl]

next week my Neuspeed lowering springs arrive from Awesome

About that - You should have an update e-mail. My mistake, for some reason when writing your out of stock e-mail I accidentally gave the wrong timeline

At the moment these springs are currently on a 2-3 week backorder.

No drama if you need to chance or cancel the order. just let me know.

Sorry for any inconvenience,
Regards, AL.

 

[AwesomeMike]

To follow on from Al,

I am now in the parts department if you need them urgently I will see if I can get them here any sooner but I cannot say for sure.

Mike

 

[AwesomeAl]

Thanks Mike!

I still feel like a right tit...

 

[IIVORC]

No worries with the springs, I can wait, thanks for keeping me informed

 

[fun]

Good post and looking good.....can u maybe post a step by step how to fit it for beginners?

Regards.

 

[IIVORC]

It's a pretty simple fit, basically I used 8 stainless self tapping screws m6 x 3/4" and some washers ( not supplied with the splitter), there are two vertical pieces of plastic in the centre of the splitter you can easily saw of with a small hacksaw to make it fit better, the plastic is strong but very easy to cut, then I used a bit of masking tape to line it up on the bumper, take your time with this stage as I did line it up a bit wonkey to start with and had to re- screw it after, then with a small screw driver just screw it to the bottom of the bumper, it's very simple thing to do just make sure it looks straight and the screws are holding in the right places
Enjoy!

 

[cjtdavenport]

Where did you get the splitter from?

 

[cuprabob]

Where did you get the splitter from?

You can get the LCR splitter from, SEAT dealers, TPS or Awesome.
Part No.
1ML 805 903

 

[cjtdavenport]

You can get the LCR splitter from, SEAT dealers, TPS or Awesome.
Part No.
1ML 805 903

Cheers, I keep meaning to get one but then I spend it on something else. I'll get one this week. The undertrays been taken off so it'll be easier to fit I'd have thought?

 

[cuprabob]

Cheers, I keep meaning to get one but then I spend it on something else. I'll get one this week. The undertrays been taken off so it'll be easier to fit I'd have thought?

Don't know, only ever had one fitted to a LCR.

£40 from here.

http://www.seataccessories.co.uk/product/Front_Splitter_-_Leon_Cupra_R_1ML805903

 

[cpc32]

Fitted a seat leon front splitter to my mk5 today, really easy to fit, only had to cut two centre pieces and screwed it on to the bumper, such a fairly cheap simple mod makes all the difference, really pleased with it, next week my Neuspeed lowering springs arrive from Awesome Gti so I CAN'T WAIT to fit them, website states a 1.4" drop all round so should look sweeeet, will add more photos when they are on.....

Where from mate I want one

 

[cuprabob]

Where from mate I want one

Have a look at my last 2 posts above.

 

[IIVORC]

Where from mate I want one

As what cuprabob said in his post, also AwesomeMike has put a link to the awesome Gti website which sells them, just click on the highlighted LCR on his post

 

[Guest]

i like th elook of the splitter on the mkv, think it hardens it up a bit if you know what i mean. Although i would like one that followed the front bumper perfectly especially at the corners.

 

[cpc32]

Thanks mate