VW Golf R32 Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
927 Posts
Discussion Starter · #1 ·
Just a quick question, will et 35 9j wheels fit on a mk4 r32 just want to confirm before purchasing anything. Any help will be much appreciated.

Thanks, maco
 

·
Member
Joined
·
575 Posts
They will fit but depending on tyre / stretch you will need arch work on the front, at least an arch roll.

You will also need a spacer to clear the strut on the front, rears may need a spacer to get them sitting the same as the fronts.

Do-able though, especially being on air!

I run 9.5J et17 on the front and they have about 5/6mm clearance to the strut, but poke about an inch past standard arches, with a small roll / flare and stretched tyres the arch sits on the tyre with a small amount of poke.
 

·
Registered
Joined
·
927 Posts
Discussion Starter · #3 ·
I think the work will definitely be worth it, best get them ordered then
 

·
Registered
Joined
·
927 Posts
Discussion Starter · #5 ·
Top mounts are built into the struts on air ride so won't be able to use top mounts
 

·
Member
Joined
·
575 Posts
With the air ride struts, if you need more camber you can slot the mounting points in the strut top. Bit crude but works. I was thinking of having some aluminium plate CNC'd up to go around the holes to neaten it up. Thats if I ever try it...

Lets have a clue on the wheels then
 

·
Registered
Joined
·
927 Posts
Discussion Starter · #10 ·
There's a few options
I'm liking the bbs lm option, 3sdm o.o6 and rial daytonas so much choice out there!
 

·
Member
Joined
·
575 Posts
I say you should definately go Rial or 3sdm... LMs are too played out...
lol
 

·
Junior Member
Joined
·
1,332 Posts
9.5j will fit but your need spacers I'm running 9.5j all round et23 fronts with 3mm spacer to clear the strut et20 final offset , camber top mounts to pull them in as they poke like a pig 225/40/18 tyre
On the rear there et38 9.5j with a 25mm spacer et13 final offset
 

·
Registered
Joined
·
259 Posts
I am getting the 3sdm 0.06 rims . I'm ummming and ahhhhing over will they fit onto my car . Any ideas people as I know absolutely bugger all when it comes to wheels and dimensions ...
 
1 - 14 of 14 Posts
Top