VW Golf R32 Forum banner
1 - 8 of 8 Posts

·
Senior Member
Joined
·
2,895 Posts
Discussion Starter · #1 ·
The glass on the drivers side came off in my hand but I managed to glue it back. But when I started to readjust it with the stick on the door card it would move the passenger side mirror at the same time but if I flicked it to that side it would only do that one mirror. Any reason why this is happening?
 

·
Registered
Joined
·
1,704 Posts
I thought it done this normally, so for example if you adjust the drivers mirror up or down it matched the passenger side for the same height ? but in and out adjustment is per side?

Maybe im wrong but mine does the same thing .................

Wez
 

·
Senior Member
Joined
·
19,388 Posts
As above it's normal.

On the MK5 with highline it is a setting that can be ticked / unticked to remove the relationship.

It's to make it easier to set up when changing between drivers
 

·
Senior Member
Joined
·
19,388 Posts
I have this on a MK4 tho ?

Wez
Yes, it's on the MK4 too but I know Raiden has a MK5.

Never having had a MK4, I couldn't be sure it was selectable via the highline on the MK4, so just made reference to MK5, which I know about.

I know it's standard on the MK4 and selectable using VCDS.
 

·
Registered
Joined
·
1,704 Posts
Yes, it's on the MK4 too but I know Raiden has a MK5.

Never having had a MK4, I couldn't be sure it was selectable via the highline on the MK4, so just made reference to MK5, which I know about.

I know it's standard on the MK4 and selectable using VCDS.
Okay thanks buddy


You are a man with knowledge


Wez
 
1 - 8 of 8 Posts
Top